• Sales & Service

    Locate Dealer or Service Provider


    Or
    Apply filter:
    Sales Service

  • English
  • Sign In
  • OnlineExpress 0

Select Your Region

North America

Latin America

Europe

Middle East

Africa

Russia

India

Pacific Rim

Australia and New Zealand

  • Australia and New Zealand
  • English

Technical Tips

Get expert advice from our factory-trained technicians who share a new tech tip every month in the Ground Support e-newsletter.

Ground vs. Platform Personality Adjustment with Handheld Analyzer

When adjusting personalities on any JLG model equipped with the ADE system, there are separate personalities for platform and ground controls.

When adjusting personalities on any JLG model equipped with the ADE system, there are separate personalities for platform and ground controls. A common misconception is that if you are plugged into the ground, then you are adjusting the ground personalities by default. This is not the case. In the analyzer, under the heading “Personalities,” you will find a subheading for “Ground Controls.” Under “Ground Controls,” you will find selections for all of the functions that can be operated from the ground. Anytime a personality setting is adjusted, ensuring that function speeds are still within acceptable ranges called out in the service and maintenance manuals is essential.

Show MoreShow Less

Handheld Analyzers

JLG has made two different shaped analyzers over the years—square and T-shaped. 

JLG has made two different shaped analyzers over the years—square and T-shaped. Our handheld analyzers are used for diagnostic programming and troubleshooting on aerial work platforms. Both will perform the same functions and work on all machines that accept an analyzer. These should not be confused with the “calibrator” that is used on Sevcon motor controllers, as that is totally different and not compatible.

Show MoreShow Less

Ground Module Configuration

When it becomes necessary to replace a ground or power module on a JLG machine, it must be properly configured after installation. 

When it becomes necessary to replace a ground or power module on a JLG machine, it must be properly configured after installation. Use your JLG® Analyzer, or the new JLG® Mobile Analyzer, for configuration by accessing the “Machine Setup” menu and choosing the correct model and options appropriate to your machine.

If possible, before you replace the module, record all of the settings. This will allow you to set everything back to the correct settings. You may also consult your machine’s service manual to get the default factory settings.

Take a look at this video for a brief overview of the JLG Analyzer’s Machine Setup functions.


Show MoreShow Less

Unapproved Attachments for Telehandlers

It is important to not use unapproved telehandler attachments for the following reasons:

It is important to not use unapproved telehandler attachments for the following reasons:

  • Range and capacity limitations for “will fit,” homemade, altered or other non-approved attachments cannot be established.
  • An overextended or overloaded telehandler can tip over with little or no warning and cause serious injury or death to the operator and/or those working nearby.
  • The ability of a non-approved attachment to perform its intended function safely cannot be assured.

Use only approved attachments. Attachments that have not been approved for use with your telehandler could cause machine damage or an accident.

Telehandler Attachments & Accessories Guide (1.1 MB PDF)

Show MoreShow Less

MaxTrax Rubber Tracks are high quality, properly fitting, affordable rubber tracks designed to offer better handling and excellent ride quality. Find the right tracks for your compact loader and mini excavator fleets right here.   

Shop MaxTrax Rubber Tracks

Locate Dealer or Service Provider

Enter Zip/Postal Code or Name
Use Current Location
Go
JLG Industries, Inc. is the world's leading designer, manufacturer and marketer of access equipment. The Company's diverse product portfolio includes leading brands such as JLG® aerial work platforms; JLG, SkyTrak® and Lull® telehandlers; and an array of complementary accessories that increase the versatility and efficiency of these products. JLG is an Oshkosh Corporation Company [NYSE: OSK].
An Oshkosh Corporation Company