 |
|
|
|
|
Aerial Work Platforms - JLG Electric Lift
Service Training
Who Should Attend This Course?
This course is for the JLG AWP service technician who will be servicing and repairing JLG Electric Powered machines. The technicians should have a minimum of 6 months' AWP experience, have completed the Basic Hydraulic and Electrical Courses, Technician Fundamentals Course, and have a thorough working knowledge of a Digital Volt Ohm Meter (DVOM) and a hydraulic pressure gauge.
Course Objectives
The objectives of the JLG Electric Lift course are to provide the opportunity for service technicians to learn and understand the machine's hydraulic and electrical systems; how to troubleshoot basic hydraulic and electrical problems; how to properly pressure check the hydraulic system; unique machine operational characteristics; how to utilize the JLG Analyzer and machine maintenance criteria and schedules. This will be accomplished through classroom and hands-on exercises.
Recommended Course Prerequisites
Basic Electric, Basic Hydraulic, Principles of a Digital Multimeter, Technician Fundamentals
Models Covered
Booms: E300AJ, E300AJP, E400A, E400AJP, E/M450A/AJ, E/M450AJ, E/M600J, M600JP
Scissors: 1230ES, 1930ES, 2030ES, 2630ES, 3246ES
Important Note: The 3369LE, M3369LE, 4069LE and M4069LE models are now covered in the Large Scissors course.
Materials
Includes the JLG Service Training Manual plus a complete set of relevant hydraulic and electrical schematics.
Administration
This course runs three days, from 8:00 a.m. to 5:00 p.m. daily beginning on Tuesday and concluding on Thursday. Early departures will not be awarded a certificate. Lunch is provided for students at JLG Training Centers.
Dates and Locations
For dates of regular scheduled factory courses click here.
Locations
Atlanta, GA
Houston, TX
McConnellsburg, PA
Riverside, CA
Oshkosh, WI
A shuttle will run between the recommended hotel and the JLG Training Center at the McConnellsburg Training Center only.
No shuttle service will be provided at the Atlanta, GA; Houston, TX; Orrville, OH; and Riverside, CA Training Centers.
Tuition
Tuition is $350 per student for the three-day course at JLG Training Centers.
How to Enroll
To enroll in JLG Training Courses, download and fill out the JLG Training Registration Form, fax it to: 717-485-6013. If you do not have an authorized JLG account number, please contact your local JLG distributor. For customer location training, contact the JLG Training Department for a quote.
Course Cancellation Policy
Customer Cancellations:
Cancellations must be faxed to the JLG Training Department at 717-485-6013 at least 14 days prior to the scheduled course. Failure to do so will result in a fee of $150 per person in addition to any actual expenses accrued.
JLG Course Cancellations:
Every reasonable attempt will be made to conduct scheduled courses. However in the event a course must be canceled, customers will be notified 14 days prior to the course start date whenever possible. Regrettably, JLG cannot be responsible for any incurred expenses due to class cancellations. Please plan your travel accordingly.
|
 |
|
 |
|
|
|
|
|
 |